Why Are My Snake Plant Leaves Falling Over?
Are your Snake Plant leaves falling over? Here, we explain the cause. Also sharing some tips on how to prune and propagate snake plants using leaf cuttings.
Snake Plant mania—I definitely have it. How about you? You may also know them as Sansevierias or Mother In Law Tongues. Whatever you call them, they’re one of the toughest and easiest houseplants that you’ll ever get your hands on.
I’m not talking about a lot of leaves here; just one or two every now and then. If you’re noticing a lot of the snake plant leaves falling over, it’s probably due to overwatering.
The leaves, roots, and rhizomes (the underground horizontal stem by which they spread) all store water.
The leaves will start to “mush out” at the base, crease, and then fall over.
This guide was first published on August 21, 2018…We updated this guide on February 11, 2021 with more info & to answer some of your frequently asked questions which you’ll find at the end!
What causes the leaves to fall over?
I’ve received questions as to why a random leaf will fall over and what to do about it.
Because this was happening to two of my plants, I thought it was time to strike while the iron’s hot, and just in case you’re wondering too.
It doesn’t happen to my Snake Plants too often, maybe once or twice a year.
In my experience, this happens with the taller growing varieties like my darker Sansevieria trifasciata “Zeylanica” and the yellow-edged Sansevieria trifasciata “Laurentii” which you see here.
The leaves grow tall (some will reach 5′) so if the base cinches in, the weight of the middle and top part of the leaf pulls it down.
Random leaves falling or leaning over is just the nature of this wonderful plant.
Related: Snake Plant Care Guide
What can you do about falling leaves?
It’s pretty simple. Just prune and propagate. You can cut up the leaf into smaller sections if you’d like but I always take the route below.
How to Fix the Snake Plant Leaves
Cut the leaf all the way down to the soil line. Make sure your pruners are clean and sharp to avoid a jagged cut and/or infection.
I cut the bottom 5 – 10″ off of the leaves. How much depends on how thin the bases of the leaves are.
You’ll want to take off those weak lower portions. Be sure to make clean cuts straight across.
You can always propagate the lower leaf sections if you’d like. Just make sure to put the ends that were growing out of the soil into the propagation mix; not the other end that you cut the top portions off of.
Because those leaves contain a lot of water, I let the bottoms heal over for 2 days before planting. Anywhere from 3-7 days is fine.
You want the stems to heal off so the cut ends callus over and protect them from rotting out while propagating.
It’s hot in Tucson now so I only needed to heal mine over for a day or 2. By the way, I’ve let leaves heal over for a month or so and they’ve propagated just fine.
You won’t see roots appearing. They’ll form after them been planted.
Time to Propagate
Spring and summer are the best times for propagation.
The way I do it is to put the leaf back in the pot with the mother plant; the one it came out of. You can also put it in a separate pot filled with succulent and cactus mix or propagation mix if you’d like.
Here’s the recipe I follow for DIY succulent and cactus mix.
Either way, you’ll probably need to stake the leaf so it stays standing while the roots form and it’s able to stay upright on its own.
I let the mix stay dry for 3-5 days after which time I water.
How to Fix the Snake Plant Leaves
I’ve found that the outer leaves are the ones that fall over. The middle leaves, if growing densely, are able to prop each other up.
As your Snake Plant grows, the falling over can happen a few times a year.
You might have to tie your leaf to the stake to keep it anchored; depending on how tall and heavy it is.
I like to use jute string because it’s tough, inexpensive and non-obtrusive.
I use this same method of pruning, healing over, and sticking back in with the mother plant outdoors too.
I take Snake Plant leaf cuttings of different sizes. All root fine.
Just know that the leaves with variegation will loose most or all of it with this method of propagation.
If you want the plant to stay variegated, divide it. I love the Fiskar Floral Nips for cutting off leaves & thin stems. They’re sharp & precise!
Snake Plant Leaves FAQs
There are a few reasons that I know of. As Snake Plants grow tall, a leaf can cinch or fold at the base & the weight pulls it over. This is what caused the leaves of my Snake Plants to fall.
Keeping the soil mix too wet is another common reason because the roots & leaves will eventually rot out.
Or, the plant could be reaching for light (these plants do best in moderate light, not no light) causing it to weaken & the leaves to fall.
It depends on what’s causing the Snake Plant leaves to fall over.
It may be as simple as staking them up. It depends on how far gone they are, but you may be able to propagate them.
Yes, you can. They root in mix or in water. If you want to try rooting one in water, be sure to keep the bottom of the leaf barely covered with water. About 1″ will do it.
The cause is too much water. Snake Plants are succulents & store water in their roots, rhizomes & leaves. I let mine dry out between waterings.
A partially cut Snake Plant leaf is a look I’m not fond of. If I’m going to cut a leaf, I cut it off all the way down to the base.
In Conclusion
Snake Plants are the ultimate “set it and forget it” houseplant making them appealing to both novice and experienced gardeners.
Just go easy on the liquid love, you don’t want to overwater a Snake Plant. Here’s how to care for a Snake Plant houseplant.
Don’t be discouraged if your Snake Plant leaves occasionally fall over, lean, or droop over the side of the pot.
It’s just the nature of the taller species and varieties. My Snake Plants have experienced this a few times. Lucky for us, they propagate easily!
Happy gardening,
Our No-Nonsense Indoor Plant Care Guide
Even if you’re a serial plant killer, this ebook aims to turn your brown thumb green! Get a multitude of practical plant care tips. Some of the 33 plants included in this book are Pothos, Agalonema, Spider Plant, Kentia Palm, a variety of Dracaenas, some succulents, plus many more.
This post may contain affiliate links, you can read our policies here.
- About the Author
- Latest Posts
Nell, the founder of Joy Us garden, was born into a gardening family and grew up in Connecticut’s countryside. After living in Boston, New York, San Francisco, & Santa Barbara, she now calls the Arizona desert home. She studied horticulture & garden design, working in the field all her life. Nell is a gardener, designer, blogger, Youtube creator, & author. She’s been gardening for a very long time & wants to share what she’s learned with you.
My whole plant is falling over. The leaves are healthy but even the stakes fell over. The plant is about 30 years old. Do I need to cut all the leaves and start over? That’s scary. I put my finger in the dirt and it feels moist, I don’t think it’s falling because it’s too dry. Please help, don’t want to lose it.
I feel I’m in need of some basics—best type of potting soil, guidelines for volume of water and number of times to water—for my flat-leaf snake plants, which are generally drooping and sparse (both in the original pot and repotted (to terracotta). All are in deeper pots. I noticed they are very susceptible to overwatering during humid summers, so have cut back substantially (1/2 cup every 3-4 weeks for the larger plants). One plant has dark, strong (not soft) but “tight” leaves that fold in half (one curls inward), with very visible vertical veining. (On the other hand, all my cylindrical snakes are doing superwell.) Finally, repotting: Is it necessary to clean off all the roots, as some have stated? Huge thank you!
Hi – Info in these posts will help you out: https://www.joyusgarden.com/?s=snake+plants As to cleaning off the roots, I usually don’t do it & I’ve repotted many Snake Plants with success! Nell
Susan – It sounds like the soil is too wet. The leaves will “mush out” starting at the base near the soil & then fall over. They can also fall over because the bases get narrower but the tops don’t & weight pulls them down. I don’t want to tell you what to do in this case, but propagating may be your only choice. Nell
Thank you for your speedy response. I guess I’ll go for the propagation and pray for the best. It’s a lot of leaves and I don’t know if I will be able to find enough stakes. Again thank you!
Hello …… my question is what do you mean by letting the leaf heal over and how to do it? Thank you!
We were visiting my in laws out of state and she gave me a snake plant but we placed it in a box in the back of the truck bed. When we got home two of the three leaves are bent about halfway down. What should I do to it. I am not sure if I should cut them both off or if they can be saved. Help Please! Thank you!!
The leaves on my taller Snake Plants bend over time Monica. You can prune them off & propagate them in a light mix. Nell
Hi Candas – It’s just like a wound on our bodies Candas. You want the bottoms exposed to air so they scab over preventing rot. With Snake Plants, I let them heal over 2 – 5 days. Nell